It registers the hours of start and end of each irrigation, the total duration and the litres applied through a single-jet meter. So, it allows you to compare the theoretical flow of the sector with the real flow getting a deviation percentage of the irrigation applied. Very useful when estimating water consumption in the field or possible failure of the irrigation system.

It includes an analogical counter, dry dial, to check water flow on-site.

By correlating the flowmeter's reading with the moisture and subsoil temperature graphs we can design an efficient irrigation routine that respects crop water needs, soil characteristics and water application system.

The flowmeter's case has an IP68 certification and is water and chemical resistant making it compatible with irrigation and the application of plant protection products. Moreover, we offer the possibility to add additional protection to the unit that protect the sensor from condensations or other elements that hamper the readings and their use.

Technical Information of the Flowmeter for irrigation

16-20mm Flowmeter

• Measuring principle: single-jet meters
• Counter length without fittings: 110 - 130 mm
• Body material: Plastic
• Registration: Dry Dial
• Protection class dry sphere: IP68 ("Copper Can")
• Nominal diameter DN (mm): DN15
• Nominal diameter (inches): 1/2"-3/4"
• Diameter (mm): from 16 to 20 mm
• Indicators: cubic meters (m3)
• Data transmission via radio frequency to the Hub/Station/Receptor up to 700 m